Calculate the following:solids loading,polymer dosage,wash-water usage and wastewater production per 1000 gal of sludge dewatered,solids recovery,and daily cake production.

At an existing treatment plant, the practice of hauling away liquid digested sludge for spreading on farmland is being replaced by belt filter presses to dewater anaerobically digested sludge prior to stockpiling and spreading on agricultural land.The design sludge production, which is the average quantity during the maximum month of the year plus 25% for future plant expansion,equals 90,000 gpd with an average solids concentration of 5.0%.Using a trailer-mounted press,the performance data for dewatering the 5.0% sludge were a hydraulic loading of 45 gpm/m,cake solids content of 24%,polymer dosage of 4.0 gpm/m with a concentration of 0.20% powdered polymer,wash-water usage of 32 gpm/m, and wastewater production of 64 gpm/m containing 2200 mg/l of suspended solids.Calculate the following:solids loading,polymer dosage,wash-water usage and wastewater production per 1000 gal of sludge dewatered,solids recovery,and daily cake production.For a design operating schedule of 12 hr/day with two presses,recommend the size of the presses for installation.

Prepare a 2-3 page max narrative discussing the content and your thoughts regarding the importance (or lack of importance) of developing such a strategy.

Exit Strategies It’s difficult to believe that after going through everything it takes to get a small business up and off the ground, often times the next steps are to….

What affirmative defenses (e.g., duress, fraud, public policy) will you present?

Leonard v. Pepsico: Cold Hard Facts   Inspired by the commercial shown in this assignment’s video, Leonard set out to obtain a Harrier Jet. Leonard explains that he is “typical….

Discuss any aspects of the course you enjoyed or would like to see improved to provide a better learning

  Supply Chain 1 – Describe and discuss three (3) concepts that you have learned in this course.  Define the concept and discuss how you demonstrated/learned the concept in course activities…..