Calculate the hydraulic loading, solids loading, polymer dosage,and solids recovery.

A belt filter press housed in a mobile trailer was used to test the dewaterability of an anaerobically digested sludge.The effective width of the belt was 0.50 m.The operating data were a sludge feed rate of 4.5m3/hr, polymer dosage of 0.45 m3/hr containing 0.20% powdered polymer by weight,and wash-water flow of 1.07 1/s.Based on laboratory analyses, total solids in the feed sludge equaled 3.5%, total solids in the cake equaled 32%, wastewater from belt washing contained 2600 mg/l suspended solids, and the filtrate was 1.20 l/s with 500 mg/l of suspended solids. Calculate the hydraulic loading, solids loading, polymer dosage,and solids recovery.

Prepare a 2-3 page max narrative discussing the content and your thoughts regarding the importance (or lack of importance) of developing such a strategy.

Exit Strategies It’s difficult to believe that after going through everything it takes to get a small business up and off the ground, often times the next steps are to….

What affirmative defenses (e.g., duress, fraud, public policy) will you present?

Leonard v. Pepsico: Cold Hard Facts   Inspired by the commercial shown in this assignment’s video, Leonard set out to obtain a Harrier Jet. Leonard explains that he is “typical….

Discuss any aspects of the course you enjoyed or would like to see improved to provide a better learning

  Supply Chain 1 – Describe and discuss three (3) concepts that you have learned in this course.  Define the concept and discuss how you demonstrated/learned the concept in course activities…..