Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….
Testimonials
Best Essays
Initially i was afraid of their services. But after i placed an order, the writer delivered a scholarly-rich and plagiarism-free paper that was 100% according to my instructions. It was the best essay i have ever received this semester. I'll order again. Thanks a lot!!
custom essay writing service Australia
2014-04-28T18:07:42+10:00
Shu Qi
Sydney, Australia
https://www.australiaessaywriting.com/blog/testimonials/best-essays/
Subject: Management
A good and plagiarism-free essay. Thanks a lot!
custom essay writing service Australia
2016-03-04T18:44:44+11:00
Shin Hua
Perth, AU
https://www.australiaessaywriting.com/blog/testimonials/awesome-work/
4
custom essay writing service Australia
Find the cross-sectional area of the tubes so that the total stiffness of the heat exchanger exceeds a value of 200 x 106 N/m in the axial direc-tion and 20 X 106 N-m/rad in the tangential direction.
The shell-and-tube exchanger shown in Fig. 1.125(a) can be modeled as shown in Fig. 1.125(b) for a simplified vibration analysis. Find the cross-sectional area of the tubes so that the total stiffness of the heat exchanger exceeds a value of 200 x 106 N/m in the axial direc-tion and 20 X 106 N-m/rad in the tangential direction. Assume that the tubes have the same length and cross section and are spaced uniformly.
