## Take the mass diffusivity for N2 – CO2 mixture as 0.16 ¥ 10–4 m2/s.

Two large vessels contain uniform mixtures of nitrogen (component A) and carbon dioxide (component B) at 1 atm, T = 289 K, but at different concentrations. Vessel 1 contains 90% N2 and 10% CO2 by moles, whereas vessel 2 contains 20% N2 and 80% CO2 by moles. The two vessels are connected by a duct of 0.1524 m ID, and 1.22 m long. Determine the rate of transfer of nitrogen between the two vessels by assuming that steady-state transfer takes place in view of the large capacity of the two reservoirs. Take the mass diffusivity for N2 – CO2 mixture as 0.16 ¥ 10–4 m2/s.

### Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

### Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

### calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….