Identify Two Simulation Models In The IT Discipline

discuss the following:

1. Methods used for development

2. Framework or tools uses for development

3. Examples of use

4. Transferability

5. Limitations

Paper should be approximately 500 words and demonstrate proper APA formatting and style. Include a cover page with your name, assignment title, and page number in the running header of each page. Your paper should include a minimum of four references from your unit readings and assigned research. Use meaningful section headings to clarify the organization and readability of your paper

  • attachment

    ITS832_Chapter_6

Calculate the maximum achievable bridge out-of-balance voltage for an applied torque T of 103 N m given the following

Four strain gauges, with specification given below, are available to measure the torque on a cylindrical shaft 4 cm in diameter connecting a motor and load. (a) Draw clearly labelled….

Find the gain and phase characteristics of the maintaining amplifier.

A solid-state capacitive humidity sensor has a capacitance given by: C = 1.7 RH + 365pF where RH is the percentage relative humidity. The sensor has an associated parallel resistance….

calculate the mean velocity of the gas at maximum flow rate

A pitot tube is used to measure the mean velocity of high pressure gas in a 0.15 m diameter pipe. At maximum flow rate the mean pitot differential pressure is….